Siniat Standard Board is a general purpose gypsum plasterboard suitable for use in partitions, linings and ceilings in both domestic and commercial applications. Made from aerated calcium sulphate di-hydrate enclosed inside liners made from recycled waste paper, it is coloured ivory on the front and grey on the back, and is suitable for tape and jointing or skimming. Multiple layers can be used where additional performance is required. Reaction to fire rated Euroclass A2-s1, d0 and compliant to BS EN 520:2004+A1:2009 Type A. This 15mm board is supplied with a square edge, 1200mm wide, and offers a longitudinal breaking load of ≥650N and transversal breaking load of ≥250N.

Benefits

• General purpose board suitable for walls, ceilings and partitions
• Reaction to fire Euroclass A2-s1, d0 for excellent fire resistance
• Suitable for tape and jointing or skimming finishes
• Compliant to BS EN 520:2004+A1:2009 Type A
• Can be used in multiple layers for added performance
• Recycled paper liners with low water absorption (less than 2% moisture content)
• Manufactured to ISO 9001 and ISO 14001 certified standards

Good to know

• Thickness: 15mm; width: 1200mm; edge: square; colour: ivory front, grey back
• Mass: 10 kg/m²; thermal conductivity: 0.19 W/mK; water vapour resistance factor: μ = 10
• Flexural strength: longitudinal ≥650N, transversal ≥250N
• Use Siniat High Thread screws for timber, Self Tapping for thin gauge metal up to 0.7mm, or Self Drilling for metal up to 2.5mm
• Not suitable for high humidity areas
• Service life of 60 years; 12.64% recycled content
• Always refer to the Siniat Standard Board technical datasheet before installation