80mm Recticel Eurothane GP PIR Insulation Board 2.4m x 1.2m - 2.88m2 per sheet
80mm Recticel Eurothane GP is a higher-performance thickness in the general-purpose range, chosen where a single layer needs to deliver more: around 3.64 m²K/W of thermal resistance, enough to help meet tighter U-value targets in walls and roofs. It is a rigid polyisocyanurate (PIR) core faced both sides with low-emissivity foil, suited to pitched roofs, timber and metal framed walls, floors and ceilings.
Each 2400mm x 1200mm board covers 2.88m² and combines a 0.022 W/mK thermal conductivity with a thermal resistance of around 3.64 m²K/W. With a compressive strength of at least 140 kPa it also stands up to screeded and boarded floor loadings, so the same board serves walls, roofs and floors alike.
It is BBA-certified across this thickness and classified Euroclass F to BS EN 13501-1, giving specifiers a clear, documented basis to work from. The low-emissivity foil facings keep moisture vapour resistance high so performance holds over time, while the square edges butt together tightly: tape or fill the joints as specified to keep the insulation layer continuous and limit thermal bridging.
It is used across new build and refurbishment in pitched roofs (between or over rafters), timber and metal framed walls (between studs or as sheathing), ground floors (including under screed and over underfloor heating) and ceilings. Where a higher target needs more, boards can be doubled with joints staggered between layers. Install to the current Recticel technical guidance, the relevant specification guide and the project specification, cutting cleanly with a sharp knife or fine-toothed saw.
Key Benefits of 80mm Recticel Eurothane GP:
- 80mm rigid PIR giving a higher single-layer thermal resistance of around 3.64 m²K/W.
- 0.022 W/mK thermal conductivity for strong thermal performance.
- BBA-certified (Certificate 02/3905) and classified Euroclass F to BS EN 13501-1.
- Compressive strength of at least 140 kPa for screeded and boarded floor build-ups.
- Suitable for pitched roofs, framed walls, floors and ceilings.
- Compatible with wet and electric underfloor heating, including under a screed.
- Low-emissivity foil facings on both sides for high moisture vapour resistance and lasting performance.
- Square edges for tight butt-jointing and reduced thermal bridging.
- Can be doubled with staggered joints for higher U-value targets.
- Light to handle and easy to cut to size on site.
- Blown with zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) agents, free from CFCs and HCFCs.
Good to know:
- PIR is moisture resistant but not waterproof. Keep boards dry, off the ground and covered, out of direct sunlight, and set aside any that have got wet.
- One board is 2.4m x 1.2m and covers 2.88m².
- Cuts cleanly with a sharp knife or insulation saw.
- Need a non-standard size? Our bespoke cutting service can help.
- Recticel's pitched roof specification guide covers roof build-ups.
- Recticel's floor specification guide walks through solid and under-screed floor types.
A higher-performing 80mm board that gives more from a single layer and serves walls, roofs and floors alike, Recticel Eurothane GP keeps specification straightforward while supporting better energy efficiency and lasting comfort.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
80mm Recticel Eurothane GP PIR Insulation Board 2.4m x 1.2m - 2.88m2 per sheet
80mm Recticel Eurothane GP PIR Insulation Board 2.4m x 1.2m - 2.88m2 per sheet
80mm Recticel Eurothane GP is a higher-performance thickness in the general-purpose range, chosen where a single layer needs to deliver more: around 3.64 m²K/W of thermal resistance, enough to help meet tighter U-value targets in walls and roofs. It is a rigid polyisocyanurate (PIR) core faced both sides with low-emissivity foil, suited to pitched roofs, timber and metal framed walls, floors and ceilings.
Each 2400mm x 1200mm board covers 2.88m² and combines a 0.022 W/mK thermal conductivity with a thermal resistance of around 3.64 m²K/W. With a compressive strength of at least 140 kPa it also stands up to screeded and boarded floor loadings, so the same board serves walls, roofs and floors alike.
It is BBA-certified across this thickness and classified Euroclass F to BS EN 13501-1, giving specifiers a clear, documented basis to work from. The low-emissivity foil facings keep moisture vapour resistance high so performance holds over time, while the square edges butt together tightly: tape or fill the joints as specified to keep the insulation layer continuous and limit thermal bridging.
It is used across new build and refurbishment in pitched roofs (between or over rafters), timber and metal framed walls (between studs or as sheathing), ground floors (including under screed and over underfloor heating) and ceilings. Where a higher target needs more, boards can be doubled with joints staggered between layers. Install to the current Recticel technical guidance, the relevant specification guide and the project specification, cutting cleanly with a sharp knife or fine-toothed saw.
Key Benefits of 80mm Recticel Eurothane GP:
- 80mm rigid PIR giving a higher single-layer thermal resistance of around 3.64 m²K/W.
- 0.022 W/mK thermal conductivity for strong thermal performance.
- BBA-certified (Certificate 02/3905) and classified Euroclass F to BS EN 13501-1.
- Compressive strength of at least 140 kPa for screeded and boarded floor build-ups.
- Suitable for pitched roofs, framed walls, floors and ceilings.
- Compatible with wet and electric underfloor heating, including under a screed.
- Low-emissivity foil facings on both sides for high moisture vapour resistance and lasting performance.
- Square edges for tight butt-jointing and reduced thermal bridging.
- Can be doubled with staggered joints for higher U-value targets.
- Light to handle and easy to cut to size on site.
- Blown with zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) agents, free from CFCs and HCFCs.
Good to know:
- PIR is moisture resistant but not waterproof. Keep boards dry, off the ground and covered, out of direct sunlight, and set aside any that have got wet.
- One board is 2.4m x 1.2m and covers 2.88m².
- Cuts cleanly with a sharp knife or insulation saw.
- Need a non-standard size? Our bespoke cutting service can help.
- Recticel's pitched roof specification guide covers roof build-ups.
- Recticel's floor specification guide walks through solid and under-screed floor types.
A higher-performing 80mm board that gives more from a single layer and serves walls, roofs and floors alike, Recticel Eurothane GP keeps specification straightforward while supporting better energy efficiency and lasting comfort.
Original: $37.12
-65%$37.12
$12.99Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
80mm Recticel Eurothane GP is a higher-performance thickness in the general-purpose range, chosen where a single layer needs to deliver more: around 3.64 m²K/W of thermal resistance, enough to help meet tighter U-value targets in walls and roofs. It is a rigid polyisocyanurate (PIR) core faced both sides with low-emissivity foil, suited to pitched roofs, timber and metal framed walls, floors and ceilings.
Each 2400mm x 1200mm board covers 2.88m² and combines a 0.022 W/mK thermal conductivity with a thermal resistance of around 3.64 m²K/W. With a compressive strength of at least 140 kPa it also stands up to screeded and boarded floor loadings, so the same board serves walls, roofs and floors alike.
It is BBA-certified across this thickness and classified Euroclass F to BS EN 13501-1, giving specifiers a clear, documented basis to work from. The low-emissivity foil facings keep moisture vapour resistance high so performance holds over time, while the square edges butt together tightly: tape or fill the joints as specified to keep the insulation layer continuous and limit thermal bridging.
It is used across new build and refurbishment in pitched roofs (between or over rafters), timber and metal framed walls (between studs or as sheathing), ground floors (including under screed and over underfloor heating) and ceilings. Where a higher target needs more, boards can be doubled with joints staggered between layers. Install to the current Recticel technical guidance, the relevant specification guide and the project specification, cutting cleanly with a sharp knife or fine-toothed saw.
Key Benefits of 80mm Recticel Eurothane GP:
- 80mm rigid PIR giving a higher single-layer thermal resistance of around 3.64 m²K/W.
- 0.022 W/mK thermal conductivity for strong thermal performance.
- BBA-certified (Certificate 02/3905) and classified Euroclass F to BS EN 13501-1.
- Compressive strength of at least 140 kPa for screeded and boarded floor build-ups.
- Suitable for pitched roofs, framed walls, floors and ceilings.
- Compatible with wet and electric underfloor heating, including under a screed.
- Low-emissivity foil facings on both sides for high moisture vapour resistance and lasting performance.
- Square edges for tight butt-jointing and reduced thermal bridging.
- Can be doubled with staggered joints for higher U-value targets.
- Light to handle and easy to cut to size on site.
- Blown with zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) agents, free from CFCs and HCFCs.
Good to know:
- PIR is moisture resistant but not waterproof. Keep boards dry, off the ground and covered, out of direct sunlight, and set aside any that have got wet.
- One board is 2.4m x 1.2m and covers 2.88m².
- Cuts cleanly with a sharp knife or insulation saw.
- Need a non-standard size? Our bespoke cutting service can help.
- Recticel's pitched roof specification guide covers roof build-ups.
- Recticel's floor specification guide walks through solid and under-screed floor types.
A higher-performing 80mm board that gives more from a single layer and serves walls, roofs and floors alike, Recticel Eurothane GP keeps specification straightforward while supporting better energy efficiency and lasting comfort.
